Headquarters

21925 Industrial Blvd.

Rogers, MN 55374

Toll Free: 1-866-260-4047

Main Voice: 763-255-3333

Fax: 763-255-3399

Email: info@americlad.com

Building 2

13375 Commerce Blvd.

Rogers, MN 55374

Toll Free: 866-260-4047

Main Voice: 763-255-3333

Fax: 763-255-3399

Email: info@americlad.com

Follow Us

  • LinkedIn Social Icon
  • Facebook Social Icon
  • Twitter Social Icon

© 2018 Quality Metalcrafts, LLC/Americlad, 21925 Industrial Blvd. Rogers, MN 55374

COMPOSITE WALL PANELS

Rainscreen Systems:

Americlad® Rainscreen systems are a dry joint system that is offered in a back ventilated or a pressure equalized configuration. We offer a caulk free design that is crisp, clean, and a very contemporary look.  These systems are designed to offer the ability to control the impact of wind driven rain and manage any water that may penetrate the wall system.  A weather barrier is required behind the composite panels to keep the building free of water damage. 

Wet Joint Systems:

Americlad® Barrier wall systems are more of a traditional panel system that include a mechanically fastened clip attachment. They have exposed caulking at the panel joints, with back routed and plastic weld corners for weatherproofing of the panel system. Our AC-1000 and AC-1300 are both a wet joint system. The AC-1300 sliding clip eliminates the need to line up, clamp down, and fasten every clip on the panel by simply sliding the clip down the edge of the panel, this will save you time and money installing them in the field.

NFPA 285 Tested and Approved Panel System

 

AC-1000

Americlad AC-1000 Barrier wall sstem compsite panel system that also can utilize stainless steel, copper, and aluminum plate.
Americlad AC-1000 Barrier wall sstem compsite panel system that also can utilize stainless steel, copper, and aluminum plate

The Americlad® AC-1000 Composite Panel System is a barrier wall system manufactured from Aluminum Composite Material (ACM) or Metal Composite Material (MCM). 

 

The system features a route-and-return fabrication method.  Americlad® AC-1000 system features include:

  • Formed and return flange and a slotted clip to accommodate expansion and contraction.

  • Wide variety of colors from the manufacturer's standard color selection.

  • Available in natural metals, including zinc, brushed aluminum, copper, and stainless steel.

  • Joints utilize a traditional backer rod and caulk system, which are field applied for a complete and sealed installation.

AC-1200 285

NFPA 285 Tested and Approved

Americlad NFPA 285 tested and approved AC-1200 EVO 285 wall panel system

The AC-1200 285 is the ideal wall assembly for the progressive architect or owner who are mindful of the energy footprint they develop.

The AC-1200 285 stands out from the crowd with its Dry-Look panel system. With no exposed fasteners, our NFPA 285 tested and approved wall panel system performs just as good as it looks. Under laboratory conditions our exterior panel system withstood the replicated wind load in excess of 300 mph!

Americlad® AC-1200 285 system incorporates perimeter extrusion and clips system, other features include:

  • Available in Back Ventilated or Pressure Equalized Systems

  • Wide variety of colors from the manufacturer's standard color selection

  • LEED Eligible

  • Available in natural metals, including zinc, brushed aluminum, copper & stainless steel

  • System features our Dry-Look™ appearance with no exposed fasteners or caulking

  • NFPA 285 Tested and Approved!

The main premise of NFPA 285 is that it evaluates the performance of the ENTIRE wall assembly during fires and not a specific materials in the assembly.

 

To meet NFPA 285 for our wall assembly, the components must include:

  • AC-1200 285 panel system

  • Larson Composite Panel

  • Roxul Cavityrock Rigid Insulation

  • Henry Blueskin SA Air Barrier

AC-1200

NO EXPOSED FASTENERS!

The AC-1200 EVO is its 100% fastener free panel fave and perimeter.

The Americlad® AC-1200 Composite Dry Joint Panel System is a rainscreen panel system manufactured from Aluminum Composite Material (ACM) or Metal Composite Material (MCM) available with Pressure Equalized and Back Ventilated Options.

 

Under laboratory conditions the AC-1200 panel system withstood the replicated wind load in excess of 300 mph. Doing so was very important for increasing the structural integrity of the exterior surface of buildings.

The key element to our design is its 100% fastener free panel face and perimeter. With the absence of fasteners penetrating individual panels, this cladding system out-performs others in AAMA 508 and ASTM testing. 

The AC-1200 incorporates a perimeter extrusion and clips with other features that include:

  • A wide variety of colors from the manufacturer's standard color selection

  • Availability in natural metals, including zinc, brushed aluminum, copper & stainless steel

  • Our Dry-Look™ appearance with no exposed fasteners or caulking

  • Choices between Back Ventilated or a Pressure Equalized System

 
 

Fully Tested System!

AC-1200 BV

Americlad AC-1200 BV back ventilated system is a fully tested wall panel sytem with various color and material options.
Americlad AC-1200 BV back ventilated system is a fully tested wall panel sytem with various color and material options.

The Americlad® AC-1200 BV back ventilated panel system manufactured from Aluminum Composite Material (ACM) or Metal Composite Material (MCM).  The system incorporates perimeter extrusions and clips.

 

Fully tested with AAMA 509, ASTM E283, ASTM E330, and ASM E3331. Our caulk free design offers a crisp, clean, contemporary look, all at an affordable price point.

Americlad AC-1200 BV system features include:

  • A wide variety of colors from the manufacturer's standard color selection. 

  • Extruded Perimeter Frame

  • Available in a PE and FR core

  • Very affordable

  • Great for tight budgets

 
 

AC-1300

Utilizing our PATENTED Sliding Clip

(US Patent #8,225,572)

The Americlad® AC-1300 Composite Panel System with Patented Sliding Clip is a barrier wall system manufactured from Aluminum Composite Material (ACM) or Metal Composite Material (MCM).  The system features a route-and-return fabrication method. 

 

Americlad® AC-1300 system features:

  • A track that is routed into the panel to accommodate our exclusive, patented sliding clip

  • The sliding clip easily slides into location for fastening back to the wall structure

  • The sliding clip accommodates expansion and contraction by requiring only one clip be fastened to each panel, allowing the others to slide freely

  • The sliding clip dramatically reduces installation and field labor, resulting in significant cost savings for the installer

  • Wide variety of colors from the manufacturer's standard color selection

  • Available in natural metals, including zinc, brushed aluminum, copper & stainless steel

  • Joints utilize a traditional backer rod and caulk system, which are field applied for a complete and sealed installation